fantastic furniture BUSSY BUNK BED MK 2 Assembly Instructions Manual page 10

Step 7
You will need:
4 x Cam Bolts 4 x Cam Nuts
Ø5 x 45 mm Ø14.5 x 11.9 mm
(H1)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
Step 8
You will need:
2 x Small Bolts
Phillips head
Ø6 x 20 mm
screwdriver
(H6)
- Screw Panel (P6) to Panel (P7) with 2 x Small Bolts(H6).
www.fantasticfurniture.com.au
(H2)
H2
- Screw 4 x Cam Bolts (H1) to Panels (P8) & (P9).
- Attach Panels (P10) to Panels (P8) & (P9) as shown.
- Insert 4 x Cam Nuts (H2) into Panels (P10)
make sure the arrow is pointing to the hole.
-Turn the Cam Nuts (H2) 90
H2
P10
P8
◦
clockwise to tighten.
P7
P6
P10
P9
H6
PAGE 10