fantastic furniture BUSSY BUNK BED MK 2 Assembly Instructions Manual page 13

Step 13
You will need:
4 x Large Bolts 4 x Barrel Nuts
Ø6 x 50 mm Ø9.5 x 11 mm
(H3)
2 x Cam Nuts
Ø14.5 x 11.9 mm
screwdriver
(H2)
Phillips head
screwdriver
H3
- Attach Panels (P8),(P10),(P11) to Panel (P3) as shown.
- Attach Panels (P6),(P9),(P10) to Panel (P3) as shown.
- Insert 2 x Cam Nuts (H2) into Panels (P10) make sure the arrow is pointing to the hole,
turn the Cam Nut (H2) 90
- Insert 4 x Barrel Nuts (H4) into Panels (P6)&(P11).
- Screw 4 x Large Bolts (H3) through Panel (P3) into Barrel Nuts in Panels (P6) & (P11).
- Remark: Adjust position of Barrel Nuts (H4) using Flat head screwdriver if necessary.
www.fantasticfurniture.com.au
This is how a cam nut works........
(H4)
Flat head
P6
P3
◦
clockwise to tighten.
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
P9
P10
P6
P10
H2
H4
P11
P8
P10
P3
P11
P10
H2
H4
H3
P3
PAGE 13