Trouble Shooting Remote Control - Prem-I-Air EH1614/EU Manual

Within 5s press the + or – button to increase or decrease the time by
0.5h. Hold the + or – buttons for greater than 2s to increase the speed
of change. When the desired time is reached press the timer button to
confirm, the T-OFF and H icons will stop flashing. The unit will now
switch OFF after the selected time has elapsed. When the unit is OFF
the TIMER can be used so set a time till it switches on. To do this press
the TIMER button and an arrow will appear on the remote control below
T-ON and H will appear and flash. Within 5s press the + or – button to
increase or decrease the time by 0.5h. Hold the + or – buttons for
greater than 2s to increase the speed of change. When the desired time
is reached press the timer button to confirm, the T-ON and H icons will
stop flashing. The unit will now switch ON after the selected time has
elapsed. Switching the unit OFF or ON manually will cancel the TIMER.
CHILD LOCK, Press the + and – buttons simultaneously to turn on or
7.
switch of the remote control LOCK. When on NO buttons on the remote
control will work till the CHILD LOCK is removed
F / C Display. To switch between C and F or the reverse press the
8.
MODE and – buttons simultaneously whilst the unit is switched OFF.

TROUBLE SHOOTING REMOTE CONTROL


During use try to point the remote control at the receiver window on the
UNIT.

The distance between the remote control and receiver should be no
more than 8m. (26')

The signal can suffer from interference from other electrical items.

When the unit is not going to be used for a prolonged period please
remove the batteries.

If the display looks faded or fuzzy the batteries should be replaced.
Page 10