Prem-I-Air EH1922 Manual

Prem-I-Air EH1922 Manual

8,000btu mobile portable local air conditioner with remote control and timer

Advertisement

Quick Links

Caution, Risk of fire
R290
EH1922
8,000BTU Mobile Portable Local Air Conditioner with
Remote Control and Timer
Please Retain for Future Reference

Advertisement

Table of Contents
loading

Summary of Contents for Prem-I-Air EH1922

  • Page 1 Caution, Risk of fire R290 EH1922 8,000BTU Mobile Portable Local Air Conditioner with Remote Control and Timer Please Retain for Future Reference...
  • Page 2: Before Use

    IMPORTANT Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. BEFORE USE  Inspect the product (including its cable and plug) for any signs of damage; If the product is damaged in anyway do not use it and contact your supplier immediately.
  • Page 3: Product Diagram

    SYMBOLS FROM THE UNIT AND USER MANUAL This unit uses a flammable refrigerant. If refrigerant leaks and comes in contact with fire or heating part, there is risk of fire. warning Read the USER MANUAL carefully before operation. Further information is available in the USER MANUAL, SERVICE MANUAL, and the like. Service personnel are required to carefully read the USER MANUAL and SERVICE MANUAL before operation.
  • Page 4 ACCESSORIES Exhaust Hose Hose Connector Window Kit Adaptor Remote Control Window Kit FITTING THE EXHAUST HOSE 1. Connect the hose connector to one end of the exhaust hose 2. Connect the windows adaptor kit to the other end of the exhaust hose...
  • Page 5 3. Extend the adjustable window kit the length of the window 4. Close your window to secure the kit in place. It needs to hold the window kit firmly in place. 5. Attach the hose connector to the exhaust air outlet of the unit.
  • Page 6: Control Panel And Display

    CONTROL PANEL AND DISPLAY Power Press to switch the machine on or off. Mode Mode button. Press to switch the operation mode between cool, fan and dry. Indicators LED for 3 operation modes. Select by pressing mode button. Minus Decreasing the desired temperature or timer setting. Indicators LED for fan speed (High/Low) Timer...
  • Page 7: Operation

    OPERATION The unit has 4 operating modes: Cool, Fan, Dry, Sleep Start up and Shutdown 1.1. Press POWER to turn the unit on (the unit runs in FAN mode as default) 1.2. Press MODE button to select the desired operating mode 1.3.
  • Page 8: Timer Setting

    TIMER SETTING The timer can be used for 2 operations: Delay start and Delay stop 1. Delay Start 1.1. When the unit is turned off, press the TIMER key to turn on timer function 1.2. Use the ADD and MINUS buttons to set the timer value 1.3.
  • Page 9: Cleaning And Care

    Place the outlet of hose over a drain or a bucket and ensure that water can flow freely out of the unit Do not submerge the end of the hose into water, as this can cause an “air lock” in the hose To avoid water spillage, tilt the drain hose down towards the floor and straighten out any kinks in the hose...
  • Page 10: Troubleshooting

    STORAGE For long term storage (more than a few weeks) it is best to clean the unit and dry it out completely: 1. Unplug the unit and remove exhaust hose and window kit. 2. Drain the remaining water from the unit 3.
  • Page 11: General Safety Requirements

    At time of going to press, the average cost of electricity is £0.15 per unit (kilowatt-hour). The amount you are being charged will be shown on your electricity bill. At this cost, the EH1922 will cost £3.20 per day to run on the “High Speed”...
  • Page 12: Technical Specification

    Do not contact Prem-i-air, only your retailer can arrange a replacement. If your product fails within the guarantee period, firstly read the “fault finding”...

Table of Contents