Prem-I-Air EH1614/EU Manual page 13

Error Code
Overcurrent Protection
E5
Condensate Tank is Full
H8
Ambient Temperature Sensor
F1
Fault
Evaporator Temperature
F2
Sensor Fault
F0
H3
E8
FAULT CONDITIONS
Meaning
1. Low Refrigirant Level
2. System os Blocked
1. Ambient Temperature
is too High.
2. The evaporator or
Condensor are
blocked.
3. Ther is a problem
with the unit.
Unit Malfunction
Page 13
Solution
Disconnect power, wait 10min
then turn the unit on. If E5 still
displays contact an authorised
repair agent
Empty condensate Tank. See
Page 3,
Contact an authorised repair
agent
Contact an authorised repair
agent
1. Clean and check all
pipes and filters
2. Turn the units OFF and
wait 10 mins.
3. Turn the unit ON, if the
problem persists contact
an authorised repair
agent.
1. Check the ambient
temperature, If above
35C the unit may not
work. Power the unit off
and wait till temperature
drops below 35C and
turn on.
2. Check the evaporator
and condesor for
blockages and remove.
Turn the unit off and
wait 3 mins then turn
on.
3. Contact an authorised
repair agent
Disconnect power, wait 10min
then turn the unit on. If E8 still
displays contact an authorised
repair agent