ABB PowerValue 11 RT G2 User Manual page 23

4 O P E R AT I O N
06: ECO frequency range settings
Interface
%
%
VAC
H %
z
VDC
07: Bypass enable/disable when UPS is off
Interface
08: Bypass voltage range setting
Interface
VAC
Settings
Parameter 1: Set the acceptable high frequency point and low frequency point for ECO
mode by pressing Down key or Up key
HLS: High loss frequency in ECO mode in parameter 1.
The setting range in parameter 1 is from 5% to 10% of the nominal voltage.
(Default: 5%)
LLS: Low loss frequency in ECO mode in parameter 1.
The setting range in parameter 1 is from -5% to -10% of the nominal voltage.
(Default: -5%)
Settings
Parameter 1: Enable or disable Bypass function. You may choose the following two
options:
ENA: Bypass enable
DIS: Bypass disable (Default)
Settings
Parameter 1: Set the acceptable high voltage point and low voltage point for Bypass
mode by pressing the Down key or Up key
23