ABB PowerValue 11 RT G2 User Manual page 26

26 A B B U P S P R O D U C T S A N D S O L U T I O N S
13: Input dry contact
Interface
14: Output dry contact
Interface
15: EPO warning clearance
Interface
16: LCD type
Interface
17: Audio alarm enable/disable
Interface
Settings
Parameter 1: Set input dry contact
DIS: Disable the function (default)
TON: UPS Turn On
TOF: UPS Turn Off
MBS: Maintain Bypass
Settings
Parameter 1: Set output dry contact
SAL: Summary Alarm (default)
BTA: Battery Active
LBA: Low Battery
UPN: UPS Normal
BSA: Bypass Active
Settings
Parameter 1: Clear EPO warning
EPO active, the UPS output is cut off. To recover the normal status, EPO connector must
first be closed. Enter this menu to clear the status of EPO. The UPS will stop alarming and
will recover in Bypass-mode
Note that the UPS needs be turned on by manual operation
Settings
Parameter 1: Set LCD type.
RAC: The LCD type is rack (default)
TOE: The LCD type is tower
Settings
Parameter 1: Set audio alarm
ENA: Audio alarm enable (default)
DIS: Audio alarm disable