Adjusting Monitor Mount Resistance - StarTech.com ARMSLIM Manual

Slim desk mount articulating monitor arm with cable management

Table of Contents

Adjusting Monitor Mount Resistance

Warning: Forced movement of the Mount Bracket without loosening the screws may

damage the product or the mounted display.

Always support your display from underneath when making any adjustments to the

LCD Arm or Mount Bracket to avoid damage to the display.

Note: For all adjustments outlined below, turning the screw clockwise will increase the

resistance, while turning the screw counter-clockwise will decrease resistance.

To increase / decrease the spring resistance, adjust the screw located on the top of the

arm, using the 6mm Allen Wrench (4). The indicator area on the arm is for reference

only, but can be used to approximate the appropriate resistance for your monitor by

weight.

Instruction Manual

Table of Contents

Do you have a question about the ARMSLIM and is the answer not in the manual?

8starmslim