Dräger Evita 2 dura Short Manual page 28

Hide thumbs Also See for Evita 2 dura:

Evita 2 dura – Cleaning, disinfection,

and sterilization

Disassembling

sensor (optional): (1) Remove from the

cuvette. Unplug the connector from the back of the

unit.; (2) Remove the cuvette of the CO2 sensor

from the Y-piece.; (3) Remove the catheter cone

from the cuvette; Prepare the CO2 sensor for wipe

disinfecting; Reprocess the reusable cuvette e. g. in

a washer-disinfector (do not use rinse aid); The

disposable cuvette cannot be reprocessed and

must be disposed of.

Temperature sensor: Remove from the

Y-piece or from the mounting of breathing

circuit; Do not pull the cable; Unplug the

connector from the back of the Evita 2 dura;

Prepare the temperature sensor for wipe

disinfecting; the temperature sensor is

designed for wipe-disinfection; the

temperature sensor must not be placed in a

cleaning and disinfection machine or

disinfectant bath.

Nebulizer (optional): (1) Remove the

nebuliser hose from the nebuliser and from

the port on the device; (2) Remove the

medication nebuliser from the adult

breathing circuit.

Nebulizer (optional): (1) Remove the

nebuliser hose from the nebuliser and from

the port on the device; (2) Dismantle the

medication nebuliser from the paediatric hose

system; (3) Remove the catheter connector

from the inlet; (4) Remove adapter from the

outlet. (5) Remove corrugated hose from the

adapter; Dismantle and reprocess the

medication nebuliser in accordance with its

specific Instructions for Use. Reprocess the

adapter parts in a washer-disinfector.