Monitor Download Progress; Disable File System - Avaya S8500 Upgrading Software And Firmware

Monitor download progress

You can check the progress of a firmware download with this procedure.
1
Type status firmware download
screen.
status firmware download last
Source Board Location: 01A04
Firmware Image File Name: usd1v22r1
Target Board Code: TN464 Suffix: GP Firmware Vintage: 8
Schedule Download? y
Start Date/Time: 10/08/2002 22:00
Target
Location St
1. 01B04
2. 01B05
3.
4.
5.
6.
7.
8.
9.
10.
Status: Pending(P) Completed(C) Failed(F) Aborted(A)
If this form is blank, the download has completed; go to
2
Check the St (status) field immediately to the right of the Target Location field to view the
progress of the firmware update:
•
•
•
•
3
Type
status firmware download last
firmware update or the entire schedule if it is completed. Notice in the previous screen that the
Start and Stop times now reflect the actual start and stop times of the download schedule and
that the Firmware Vintage now reflects the vintage that was downloaded.
4
If one or more downloads fail, go to
5
If previously you set the Remove Image File After Successful Download? field
on the Firmware Download screen to y, then the download procedure is now complete.
If you previously set it to n, then proceed to the next section,
manually remove the firmware image and disable the file system on the source circuit pack.

Disable file system

Upgrading Software and Firmware—S8500 Configuration
December 2003
STATUS FIRMWARE DOWNLOAD
Remove Image File After Successful Download? y
Target Target
Location St Location St
C 11. 21.
C 12. 22.
13. 23. 33.
14. 24. 34.
15. 25. 35.
16. 26. 36.
17. 27. 37.
18. 28. 38.
19. 29. 39.
20. 30. 40.
(P)ending
(C)ompleted
(F)ailed
(A)borted
NOTE:
Performing the following steps on the TN799DP (C-LAN) or TN2501AP (VAL) circuit
packs removes only the ftplogin and the ftppassword. The allocated memory for the file
system remains reserved for the session.
Upgrading firmware on programmable circuit packs
and press Enter to display the Status Firmware Download
Stop Date/Time: 10/08/2002 22:02
Target Target
Location St
31. 41.
32. 42.
43.
44.
45.
46.
47.
48.
49.
50.
Step
and press Enter to view the progress of the last completed
Testing firmware download
Location St
3.
on page 56.
Disable file system on page 55, to
55