Avaya S8500 Upgrading Software And Firmware page 59

Note that the values in the
6
Type get boot-image UUCSS
pack.
get boot-image 1C07
Board Type: TN2501
FW Vintage: 02
HW Signature: 02
Suffix: A
Date: 09/13/02
Timestamp: 10:30:50
CRC Checksum: Good
Active Image: No
Reboot Image: No
7
Ensure that both the Active Image and the Reboot Image fields are as you expect.
Upgrading Software and Firmware—S8500 Configuration
December 2003
Reboot Image
NOTE:
If a TN799C/DP C-LAN or TN2305 VAL circuit pack, reseat them to activate the new
firmware image. Go to Disable file system
to check the status of the firmware images on the target circuit
DISPLAY FIRMWARE IMAGE(S)
Image 1 Image 2
TN2501
01
02
A
05/06/02
12:42:18
Good
Yes
Yes
Upgrading firmware on programmable circuit packs
field have changed.
on page 55.
59