Welch Allyn Spot VS100 Directions For Use Manual page 31

Directions For Use
Some printers need you to select a print driver before you can set it as the default
printer. Print drivers help the printer to print your content in the correct format. If your
printer does not have a print driver associated with it, you need to tell the vision screener
which driver to use. The vision screener contains generic PCL drivers that can be used
with older printers, as well as a custom driver for label printers. For more information,
see To select a print driver.
If you do not see the printer you want on the Add Printers screen, you need to add the
printer manually, which requires you to add the printer's location and other details as
well as selecting a print driver. For more information, see To add a printer manually.
Note
To add a printer
For most printers, all you need to do is add the printer to the Available Printers screen
and set it as the default printer. If a default printer has already been set, it displays first.
An icon next to each printer indicates the type of connection.
1. If adding a USB printer, connect the USB cable from the printer to the vision
screener's USB port. If adding a network-connected wireless printer, make sure the
vision screener has been added to the wireless network.
2. Touch Tools, and then touch Printer.
The Available Printers screen displays all the printers that have been saved on the
vision screener.
3. Touch Plus.
The Add Printers screen appears.
4. If you do not see the printer you want to add, touch Refresh.
The list of printers may take a moment to update.
5. Select the printer.
If you do not see the printer on the Add Printer screen, see To add the printer
manually.
6. Touch Save.
The printer is automatically set as the default printer.
7. If the Save icon does not appear, see To add a print driver manually.
8. To verify that the printer is installed correctly, touch Print test page.
9. If the test page does not print correctly, refer to the Troubleshooting section.
In order to install the QL-820NWB on the vision screener, it must have
QL-820 in its name on the network and you must select the driver labeled
QL-820NWB from the driver list. Use Brother DK2205 Continuous Length
Paper Tape or equivalent.
Advanced settings on the vision screener 27