Turning the Answering System On/Off
1.
To turn the Answering System on, press answer.
A tone sounds, and the current outgoing message
plays on the Base Unit speaker. A second tone
sounds to indicate the unit is ready to answer calls,
and the Message Counter LED turns on.
have unread new messages.
2.
To turn the Answering System off, press answer
again.
A tone sounds and the Message Counter LED turns
Off.
Setting the Clock and PIN Code
The clock in your XCAI680 Answering System starts when power is applied to the Base Unit. You
can also set a personal four-digit code (0000 to 9999) for your PIN code. You must use your
PIN code to access your Answering System from a touch-tone telephone.
1.
Press caller id on the Handset.
2.
Press f/ash/function on the Handset.
3.
Enter the number which corresponds to the day.
4.
Enter the two-digit number for the hour (01-12) and then the minute (00-59).
Answering System Setup
41
1 Saturday
7