Using Caller Id; The Caller Id Display; Viewing Calls In Memory - Uniden XCAI680 Operating Manual

Cordless integrated answering device with caller id

Hide thumbs Also See for XCAI680:

Table of Contents

To make use of these features, you must first subscribe to your telephone service provider.

The LCD displays information about the current call and previous calls received on your XCAI680

cordless phone, including the total calls received, and the number of new calls received.

The LCD display is always active while the Handset is on the Base. When the Handset is removed

from the Base, the LCD display turns off immediately. To reactivate the LCD, you need to press the

called id key. The backlight will turn on briefly and the LCD will display the call summary

shown below.

LCD with Handset on Base

LCD with Handset off Base and caller id Pressed.

Note: The XCAI680 can store information on up to 30 different calls. Information on new calls

received after 30 calls will be stored, and the oldest call in memory will be deleted.

Remove the Handset from the Base Unit.

Press caller id.

To view calls stored in memory, Press the V or A

keys.

-OR-

If the Name Tag feature is on and the Caller details is in the

phone dial memory.

To dial the number currently displayed, press the talk key.

Note: If the number is longer than 12 digits, the display will scroll to the left until the last number is

shown in the display.

Using Caller ID

Table of Contents