Using The Answering System; Answering System Options (Answering Setup); Accessing The Answering System - Uniden XDECT SSE45 Owner's Manual

USING THE ANSWERING SYSTEM

Answering System Options (Answering Setup)

You can change the answering system options from any handset. Just open the menu
and select Answering Setup.
Menu Options
Security Code
Ring Time
Record Time
Message Alert
Call Screen
Answer On/Off
Record Greeting
Greeting Options

Accessing the Answering System

With the phone in standby, you can access your system
from the base or remotely from any handset. Only 1
handset or the base can access the system at a time.
During remote access;
• The system beeps so you know it's waiting for your
next command.
• You can press the number key shown next to each
command instead of scrolling through the screens.
1. Press MENU/OK and select Messages/Play Message to
listen to your answering system messages. The LCD displays CID information for the
current message.
2. The LCD also displays actions you can take while the message is playing. Press the
number on the keypad that corresponds to the action you want to take. If you stop
the message, the LCD displays 2:Play instead of 5:Stop.
What it does
Enter a 2-digit PIN so you can access your answering system
from any touch-tone phone (see page 30).
Set the number of rings (6, 9, or 12) before the system answers.
If you have the Ring Time set to Toll Saver, the system answers
after 2 rings if you have new messages and 4 rings if you don't.
(see page 30 for more details).
Set the time (1 or 4 minutes) for callers can leave a message.
Choose Announce Only if you don't want the system to let callers
leave a message.
Have the base beep every 15 seconds when you have a
new message. The alert stops after you listen to all your new
messages or if you press any key on the base.
Turn on the call screen feature so you can hear callers as they
leave messages on the base speaker (see page 29).
Turn your answering system on or off. (To turn your system on or
off from the base, just press ON/OFF.)
Record an outgoing message or greeting (see page 28).
Switch greetings or delete your greeting (see page 28).
Anderson, Jim
11:35 AM 1/04
24/05
1:Repeat 3:Skip
4:Delete 5:Stop
27