Table of Contents
Advertisement
To...
make an intercom
page
cancel a page
answer a page
end an intercom
call
Chain Dialing
If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
1.
Enter the code number (up to 20 digits) into the phonebook just like a
regular phonebook entry. Be sure to enter the code number into the
phonebook exactly as you would enter it during a call.
2.
When you hear the prompt that tells you to enter the number, open the
phonebook and find the entry that contains your code number.
MEnu/SElEcT
3.
Press
the phonebook.
Voice Message Notification
If you subscribe to a voice mail service, your phone can notify you
♦
when you have a new message. This feature supports Frequency-
Shift Keying (FSK) notification. Contact your voice mail provider for
information.
♦When you have new messages, the display shows a message icon.
After you listen to your messages, the message icon turns off. If it
doesn't, you can reset it: With the phone in standby, open the menu
and select
Global
USING THE ANSWERING SYSTEM
Answering System Options
You can set or change the answering system options from any handset.
Just open the menu and select
Enter a 2-digit PIN so you can access your answering system
Security Code
from any touch-tone phone (see p. 18).
Press...
inTErcoM/clEar.
Select the handset you want to talk with,
or
All
to page all handsets at the same time.
End
.
or
inTErcoM/clEar
End
. Both handsets return to standby.
to send the code. If you change your mind, just close
Setup; select
VMWI
(Ans.
Ans.
.
Talk/flaSh
Reset, then select
Setup)
Setup. Select one of the following:
Yes.
15
Hide quick links:
Advertisement
Table of Contents
