Remote Operation; Using A Touch-Tone Phone - Uniden XCAI680 Operating Manual

Cordless integrated answering device with caller id

Hide thumbs Also See for XCAI680:

User manual (63 pages)

Table Of Contents

Table of Contents

You can operate your XCAI680 while you're away from home by calling from any touch-tone phone.

When using this feature, remember these important guidelines.

You should change your Personal Identification Number (PIN) before using your Handset.

When you first apply power, the code is set to 0000.

You cannot change the Time and Day Stamp or your PIN code from a touch-tone phone.

Using a Touch-Tone Phone

You can operate your Answering System using any touch-tone telephone. Use this function to

check for recorded messages, play or delete messages, or even record a new outgoing message.

Call your telephone number.

During the outgoing message playback, press R

followed by your PIN number.

Note: If the answering machine is switched off, wait

until after the fifteenth ring and your answering

system will switch ON automatically. Now

enter # followed by your 4 digit PIN number.

For example, use aa@@@

Note: This number will be the 4 digit

PIN number you chose to replace the factory

preset PIN number 0000. Refer to page 40 to

change your PIN number.

The Answering System announces the Time and Day Stamp followed by the total number of

new messages stored in memory.

You then hear intermittent beeps indicating that the system is in the Command Waiting Mode.

Note: You must enter a command within 20 seconds or the Answering System hangs up and

returns to Standby.

Use this chart to select the function you want.

When you've finished, hang up to exit the system.

Your Answering System automatically returns to

Standby.