Uniden XC815 Owner's Manual
Uniden XC815 Owner's Manual

Uniden XC815 Owner's Manual

Cordless extend-a-phone

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Uniden XC815

  • Page 2: Table Of Contents

    To get the most from your phone, please read this owner’s manual thoroughly. Also be sure to complete the product registration form and mail it in. Be sure to visit our web site at: www.uniden.com. ™ allows you hang up by ™...
  • Page 3: Included With The Xc800 Series Phone

    Included with the XC800 Series Phone If any of these items are missing or damaged, contact Uniden Parts Department at: (800) 554-3988, 8:00 am to 5:00 p.m. Central, Monday through Friday. Handset AC Adapter Precautions and Important Safety Instructions This Owner’s Manual...
  • Page 4: Controls And Functions

    5. Ringer and Earpiece Volume Ringer Key 6. Talk/Batt Low Indicator 7. Flash/Redial Key 8. Channel Select Key 9. Pause 10. Tone Pulse switch 11. Telephone Jack In 12. AC Adapter Jack In 13. Status (in use) Indicator 14. Page/Find Key status status status...
  • Page 5: Installation

    6. Plug the AC adapter into a standard 120 VAC wall outlet. Note: Do not use an outlet controlled by a wall switch. Use only the Uniden AC adapter supplied with this phone. Installation Wall Installation Standard Wall Plate Mounting These phones are designed to be mounted on a standard AT&T or GTE wall plate.
  • Page 6: Direct Wall Mounting

    6. Place the base on the screws and push down until it’s firmly seated. 7. Plug the other end of the telephone line cord into the wall jack. 8. Plug the AC adapter into a standard 120 VAC wall outlet.
  • Page 7: Setting Up Your Phone

    Extending the Antenna Before using your phone, be sure to raise its antenna to the vertical position. Then, fully extend the antenna. Installing the Handset Battery Pack 1. Press in on the battery cover release. 2. Slide the battery compartment cover down. 3.
  • Page 8: Low Battery Indicator

    To Avoid this Memory Effect At least once a month, operate the unit until the “Battery Low” indicator appears. Then recharge the battery for a full 15 - 20 hours. Avoid putting the handset back in the base after using the phone for a short time.
  • Page 9: Using Your Phone

    Making and Receiving Calls The following features of the XC800 Series phones are different depending on the handset’s location when you make or receive a call. Handset On Base Pick up handset Answer Call (AutoTalk). 1) Pick up handset. 2) Press Make Call 3) Listen for dial tone.
  • Page 10: Programming Your Phone

    Programming Your Phone All programming functions must be completed when your phone is in the standby mode because programming keys do not function while you are on the phone. Storing a Number in Memory Use these keys to store a number in memory. Note: An error tone will sound and the programming procedure will be canceled if more than 20 seconds elapse between each keystroke...
  • Page 11: Troubleshooting

    If your XC800 Series Cordless Telephone is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service at (800) 297-1023, 8:00 a.m. to 5:00 p.m. Central, Monday through Friday.
  • Page 12 Covered under one or more of the following U.S. patents: ©1998 Uniden America Corporation. 4,511,761 4,523,058 4,797,916 5,426,690 5,660,269 5,661,780 All rights reserved. UDZZ01518ZB 4,595,795 5,650,790 and other patents pending ® Printed in China.

This manual is also suitable for:

Xc810Xc800 series

Table of Contents