Voice Message Notification; Using The Answering System; Answering System Options (Ans. Setup) - Uniden Elite 9135 Owner's Manual

Elite 9135 series
Table of Contents

Advertisement

To...
make an intercom
page
cancel a page
answer a page
end an intercom call

Voice Message Notification

If you subscribe to a voice mail service, your phone can notify you when
you have a new message. This feature supports Frequency-Shift Keying
(FSK) notification. Contact your voice mail provider for information.
When you have new messages, the display shows a message icon. To
access your voice mail, press
When you select
#
Access number if you have not yet set one up (see page 10). If you
have already set one up, your phone will dial it.
After you listen to your messages, the message icon turns off. If it
doesn't, you can reset it: With the phone in standby, open the menu and
select
Global
Setup; select

USING THE ANSWERING SYSTEM

# The answering system works with land line calls only.
Answering System Options
You can set or change the answering system options from any handset.
Just open the menu and select
Menu Option
Security Code
Ring Time
Record Time
20
Press...
InteRcom/cleaR
with, or
ALL
.
end
InteRcom/cleaR
. Both handsets return to standby.
end
message/mute
Mail, you will be prompted to enter a Voice Mail
Voice
VMWI
Ans.
What it does
Enter a 2-digit PIN so you can access your answering
system from any touch-tone phone (see page 23).
Set the number of rings (6, 9, or 12) before the system
answers.
Toll Saver
if you have new messages or after 4 rings if you don't.
Set the amount of time
leave a message. Choose
the system to let callers to leave a message.
. Select the handset you want to talk
to page all handsets at the same time.
or
.
Home/FlasH
and select
Reset, then select Yes.
(Ans.
Setup)
Setup.
makes the system answer after 2 rings
(1 or 4
minutes) callers have to
Announce Only
Voice
Mail.
if you don't want

Advertisement

Table of Contents
loading

Table of Contents