Using The Answering System; Answering System Options (Ans. Setup) - Uniden BLUETOOTH XDECT R035BT Owner's Manual

number. Press
your mind, use
This feature supports Frequency-Shift Keying (FSK) message
Voice message notification
notification. Contact your voice mail provider for more details.
x
If you subscribe to a voice mail service, your phone can notify you
when you have a new message waiting.
x
When you have new messages, the voice message icon (
appears in the display, and the light at the top of the handset
x
blinks.
The voice message icon should disappear after you listen to all
your new messages. If it doesn't, you can reset it manually: With
x
the phone in standby, open the menu and select
Select
VMWI Reset
The answering system works with land line calls only and provides up

uSInG THE anSWERInG SySTEM

to 15 minutes of total record time. The system will not answer or take
messages on incoming call on the paired Bluetooth phones.
You can change the answering system options from any handset. Just

Answering System Options (Ans. Setup)

open the menu and select
Security Code
Ring Time
to transmit the code. Or, if you change
MENu/sELECT
PhoNEBook/LEfT
, then select
Ans. Setup
Enter a 2-digit PIN so you can access your
answering system from any touch-tone phone
(see page 29).
Set the number of rings (6, 9, or 12) before the
answering system answers the phone. Choose
Toll Saver to have the system answer after 2
rings if you have new messages or after 4 rings if
you don't.
to close the phonebook.
.
Yes
. Select one of the following:
)
Global Setup
.
25