Setting Caller Id On Call Waiting - Uniden XCAI680 Operating Manual

Setting Caller ID on Call Waiting

Note: This feature is not currently available in Australia.
You XCAI680
can set your
while you are on a call.
Note:
With this feature set you will not be able to hear the person you are talking to for a brief period
after you receive the call waiting tone.
To turn Caller ID on Call Waiting on:
1. Remove the Handset from the Base Unit.
flash/function
2. Press
3. Press 1.
4. Press mem. A confirmation tone sounds and the display
remains on for two seconds.
5. Replace the handset in its cradle on the base unit for the
new setting to take effect.
To turn Caller ID on Call Waiting off:
1. Remove the Handset from the Base Unit.
f/ash/function
2. Press
3. Press 0.
4. Press mem. A confirmation tone sounds and the
display remains on for two seconds.
5. Replace the handset in its cradle on the base unit
for the new setting to take effect.
phone to display information about calls that generate a call waiting tone
twice.
twice.
25