Using The Answering System; Answering System Options (Answering Setup) - Uniden D3097 Series User Manual

If...
the handset and base are connected
(intercom call) and no signal from
the base
the handset is in Talk mode and
moves out of range
the handset and base are in standby
mode and the handset does not get
a signal from the base for 5 seconds
audio deteriorates
you are trying to go off-hook
you are trying to go on-hook

USING THE ANSWERING SYSTEM

Answering System Options
You can change the answering system options from any handset. Just open the
menu and select
Menu Option
Security Code
Ring Time
Record Time
Message Alert
Answer Language
Call Screen
Downloaded from www.Manualslib.com
Answering Setup.
What it does
Enter a 2-digit PIN so you can access your answering system
from any touch-tone phone (see page 20).
Set the number of rings (2, 4, or 6) before the system answers
(see page 20 about
Set the amount of time
message. Choose
to let callers leave a message.
Have the base beep every 15 seconds when you have a new
message. The alert stops after you listen to all your new
messages or if you press any key on the base.
Change the language of the system's voice prompts.
Turn on the call screen feature so you can hear callers as they
leave messages on the base speaker (see page 20).
manuals search engine
Then...
the handset sounds an error tone and Out
of Range displays.
the outside line is put on Hold for 30
seconds and then dropped. The LCD
alternately displays Out of Range and
Check Base Power.
the LCD alternately displays Out of Range
and Check Base Power.
the handset sounds an error tone. The
LCD alternately displays End of Range and
Move toward base.
call data displays and then an error tone
sounds. The LCD alternately displays Out
of Range and Check Base Power.
Talk mode continues for 5 seconds and
then END displays.
(Answering
Setup)
Toll Saver).
(1 or 4 minutes) callers can leave a
Announce Only if you don't want the system
English - 17