Table of Contents
Advertisement
When using your telephone equipment, these basic safety precautions should always be followed to
reduce the risk of fire, electrical shock, and injury to persons:
1.
Read and understand all instructions.
2.
Follow all warnings and instructions marked on the product.
3.
Unplug this product from the wall outlet before cleaning, and use a dry cloth, without liquid or
aerosol cleaners.
4.
Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or
laundry tub, in a wet basement, or near a swimming pool.
5.
Do not place this product on an unstable cart, stand, or table. The telephone may fall, causing
serious damage to the unit.
6.
Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect
the product from overheating, these openings must not be blocked or covered.This product should
never be placed near or over a radiator or heat register. This product should not be placed in a
built-in installation unless proper ventilation is provided.
7.
This product should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your dealer or local
power company.
8.
Do not allow anything to rest on the power cord. Do not locate this product where the cord will be
damaged by persons walking on it.
9.
Do not overload wall outlets and extension cords, as this can result in the risk of fire or electrical
shock.
10
Never push objects of any kind into this product through cabinet slots, as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
Never spill liquid of any kind on the product.
11
To reduce the risk of electric shock, do not disassemble this product. Take it to qualified service
personnel when service or repair work is required. Opening or removing covers may expose you
to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the
appliance is subsequently used.
12.
Unplug this product from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
A.
When the power supply cord is damaged or frayed.
B.
If liquid has been spilled into the product.
C.
If the product has been exposed to rain or water.
D.
If the product does not operate normally when following the operating instructions. (Adjust
only those controls that are covered by the operating instructions. Improper adjustment of
other controls may result in damage and will often require extensive repair work by a
qualified technician.)
E.
If the product has been dropped or the cabinet has been damaged.
F.
If the product exhibits a distinct change in performance.
13.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Important Safety Instructions
3
Advertisement
Table of Contents
Troubleshooting
