Installation And Basic Setup Instructions; Wall-Mounting The Telephone; Figure 2 Mount The Phone On The Wall Plate - Uniden UIP200 User Manual

Installation and Basic Setup Instructions

Wall-Mounting the Telephone

The wall mount bracket is included with the UIP200. The wall mount bracket can
be attached to the bottom of the UIP200, allowing the user to wall mount the
telephone. The bracket can only be attached one way. Once the bracket is attached,
the phone may be mounted over an existing wall plate.
Figure 2 Mount the Phone on the Wall
Plate
After attaching the wall mount bracket,
place the bracket holes over the screws of a
standard wall plate. Push the phone in and
slide it down until it is securely seated on the
plate.
Figure 1 Attaching the Wall Mount Bracket
Attach the wall mount bracket to the rear of
the phone. Be sure the wide end of the
bracket is at the bottom of the phone and
the narrow end is at the top.
UIP200 User's Manual
Page 14 of 27
Rev. 1.0, © UAC, May, 2004