Audible Indicator (Buzzer) Test; Clock; Change The Time; Change The Date - Honeywell MORLEY IAS DX Series User Manual

MORLEY-IAS
5.3.1.5

Audible Indicator (Buzzer) Test

•
To select the option, press '5'.
•
To terminate the test, press 'X'.
•
The buzzer will beep on and off. The test will automatically stop after 60 seconds.

5.3.2 Clock

•
To display the Clock Menu, press '3' and the display shows:
[U0 Clock]

5.3.3 Change the Time

•
To change the time, press '1' and the display shows:
ENTER NEW TIME
--:--
•
Enter the time in 24-hour format using the number keys (i.e. for 1:30PM enter 1330). The numbers
entered are echoed on the display. If an incorrect digit is entered, press the
erase the number. (Note: leading zeros must be entered, i.e. 8:30AM must be entered as 0830).
•
Press the ' ' key to confirm the change and return to the clock menu.
•
Press the 'X' key to cancel any change and return to the clock menu.
•
If the time entered is not recognised, a brief message is shown before returning to the clock menu, as
follows:
Invalid Value Entered !

5.3.4 Change the Date

•
To change the date, press '2' and the display shows:
ENTER NEW DATE
--/--/--
•
Enter the date in the format shown using the number keys (i.e. dd=day, mm=month, yy=year). The
numbers entered are echoed on the display. If an incorrect digit is entered, press the
and erase the number. (Note: leading zeros must be entered, i.e. for 3
•
Press the ' ' key to confirm the change and return to the clock menu.
•
Press the 'X' key to cancel any change and return to the clock menu.
•
If the date entered is not recognised, a brief message is shown before returning to the clock menu, as
follows:
Invalid Value Entered !
Page 26
1:Time 2:Date
(format hh:mm)
←:BackSp
:Confirm
(format dd/mm/yy)
←:BackSp
:Confirm
Document No. 996-148-000-5, Revision: 5
Dimension Series
X:Exit
key to backspace and
X:Exit
key to backspace
rd
of May 2003 enter 030503).
User Manual