En54 Information - Honeywell MORLEY IAS DX Series User Manual

MORLEY-IAS

1.5 EN54 Information

•
This Fire Alarm Control Panel complies with the requirements of EN54-2/4. In addition
EN54
to the basic requirements of EN54, the panel conforms to the following optional
functions.
Option
Indication:
Alarm counter
Fault signals from points
Controls:
Delays to outputs
Manual or automatic switching of delays to outputs
Dependency on more than one alarm signal: Type C
Disablement of each address point
Test condition
Outputs:
Outputs to fire alarm device(s)
•
The power supplies for the Dimension Series of panels comply with the following
EN54
clauses of EN54-4.
DX1/2/4e Power Supply Functions
Derive power supply from main power source
Derive power supply from a standby battery source
Charge and monitor the standby battery source
Detect & signal power supply faults
•
In addition to the functions required by EN54-2, the panel supports a number of
EN54
ancillary functions that are not required by EN54. These are outlined below:
N/A
Ancillary Function
Auxiliary supply output
Peripheral loop output & supported devices
Auxiliary relay outputs
Printer option
Class Change Input
Group Disable
Page 4 Document No. 996-148-000-5, Revision: 5
Dimension Series
EN54-2 Clause
7.13
8.3
7.11.1
7.11.2
7.12.3
9.5
10
7.8
EN54-4 Clause
5.1
5.2
5.3
5.4
Manual Section
Refer to Product Manual
Refer to Product Manual
Refer to Product Manual
8
7.2
5.3.5.3
User Manual