Disablement Conditions; Panel Disablements; Zone Disablements - Honeywell MORLEY IAS DX Series User Manual

Dimension Series

4.2.4 Disablement Conditions

•
If zones, input devices, output devices or other disablement conditions have been programmed, the
DISABLEMENT LED is illuminated along with other appropriate system condition LED Indicators.
•
To view more detailed information regarding the disablement conditions use the navigation keys as
follows.
•
Press the
further information on the faults. For example:
TOTAL PANEL DISABLED :3
TOTAL ZONES DISABLED :3
•
This display indicates that there are three zones in either a full or partial disablement condition and
that three panel related disablements have been configured. To view these, press the
the panel related disablement and press the
4.2.4.1

Panel Disablements

DISABLED
DISABLE ALL SOUNDERS
•
The above example shows there are three panel related disablements and the first disablement is
shown. This was a disablement of all sounders / bells configured at 12:15PM.
•
If there is more than one disablement indicated, use the
more' option is not shown if there is only one event, the '↓' and '↑' keys are shown for the first and last
entries in the list). Press the
4.2.4.2

Zone Disablements

•
When selected, the display shows the first zone with a disablement condition. For example:
DISABLED
<Zone-Location-Text>
•
The display shows the Zone number and Zone Location Text (20 character description), the
disablement number and total number of zones in a disablement condition (01/03) and whether the
zone is fully disabled. If the zone is only partially disabled, the display is as follows:
DISABLED
<Zone-Location-Text>
•
To view other zones in a disablement condition (or to return to the main display), press the
keys.
EN54-2 9.5
EN54
Disablement of
each addressable
point.
User Manual
keys to select the DISABLED option, then press the
01/03
key to return to the main display.
ZONE 1 01/03
ZONE 1 02/03
•
To view the devices (points) in a zone with only partial disablement
condition, press the
disablement in the selected zone. For example:
Document No.996-148-000-5, Revision: 5
→:Panel Events
↓:Zone Details
key to view the zones in disablement.
12:15
←:back
:more
and keys to view these (Note: The ' :
: More Zones
ZONE FULLY DISABLED
: More Zones
→:Device Details
key. The display then shows the first point in
MORLEY-IAS
key and the display shows
key to view
and
Page 15