Override Delays; Fault Conditions; Panel Faults; Zone Faults - Honeywell MORLEY IAS DX Series User Manual

Dimension Series
•
To view other points in fire in this zone, press the
shown if there is only one event, the '↓' and '↑' keys are shown for the first and last entries in the list).
•
To return to the list of zones in fire, press the
4.2.1.3

Override Delays

EN54-2 7.11d
EN54
Override delays at
Level 1

4.2.2 Fault Conditions

•
If the panel detects a fault, the FAULT LED is illuminated along with other appropriate system
condition LED Indicators. The internal buzzer will sound and the alphanumeric display will indicate the
number of faults.
•
To view more detailed information regarding the fault locations use the navigation keys as follows.
•
Press the
further information on the faults. For example:
TOTAL PANEL FAULTS
TOTAL ZONES IN FAULT :1
•
This display indicates that there is one zone in fault and that three panel related faults have been
registered. To view these, press the
view the zones in fault.
4.2.2.1

Panel Faults

FAULT
INPUT OPEN CIRCUIT
•
The above example shows there are three panel related faults and fault number two is shown. This
was an input open circuit on "Monitored Input 1" registered at 12:15PM.
•
If there is more than one fault indicated, use the
option is not shown if there is only one event, the '↓' and '↑' keys are shown for the first and last entries
in the list). Press the
4.2.2.2

Zone Faults

•
When selected, the display shows the first zone with a fault condition. For example:
IN FAULT
<Zone-Location-Text>
•
The display shows the Zone number and Zone Location Text (20 character description).
User Manual
•
The DX1e, DX2e and DX4e control panels can be
configured to operate with delays to outputs. In this
case, a manual call point (MCP) will be located next
to the panel.
•
To override any delays and immediately activate the
bells and other fire alarm output devices, break the
glass in the call point.
keys to select the FAULT option and then press the
:3
key to view the panel related faults and press the
02/03 MON INPUT 1
key to return to the main display.
ZONE 1 01/01
Document No.996-148-000-5, Revision: 5
and keys (Note: The ' : more' option is not
key.
→:Panel Events
↓:Zone Details
12:15
←:back
:more
and keys to view these (Note: The ' : more'
: More Zones
→:Device Details
MORLEY-IAS
FIRE
BREAK GLASS
Press Here
key. The display shows
key to
Page 13