Test Conditions - Honeywell MORLEY IAS DX Series User Manual

MORLEY-IAS
•
To view other zones in a fault condition (or to return to the main display), press the
EN54-2 8.3
EN54
Fault Signals from
points.
FAULT
NO REPLY FROM DEVICE←:back
•
The display shows the fault number and the total number of devices (points) in a fault condition in this
zone (01/02), the Zone number (Z01), the loop number to which this device is connected (L1), the
address of this device on the loop (A010), the type of device (OPT), the time at which the device
entered the alarm condition (12:19) and a description of the fault.
•
To view other points in fault in this zone, press the
if there is only one event, the '↓' and '↑' keys are shown for the first and last entries in the list).
•
To return to the list of zones in fault, press the
•
To view the location texts for this device press the
Text and the Point Location Text (20 character description each) for this device. For example:
FAULT
<Zone-Location-Text><Point-Location-Txt>
•
To return to the previous display, press the

4.2.3 Test Conditions

EN54-2 10
EN54
Test Condition.
•
To view the zones in a test conditions use the navigation keys as follows.
•
Press the
further information on the faults. For example:
IN TEST
<Zone-Location-Text>
IN TEST
<Zone-Location-Text>
•
The display shows the Zone number and Zone Location Text (20 character description) of the first
zone in a test condition. It also indicates whether the sounders / bells will ring briefly when a device in
the zone is tested.
•
To view other zones in a test condition press the
•
To return to the previous display, press the
Page 14
•
To view the devices (points) in a fault condition, press the
display then shows the first point in a fault condition in the selected
zone. For example:
01/02 Z01 L1 A010 OPT 12:19
01/02 Z01 L1 S010 OPT 12:19
•
If zones have been configured to be in a test condition (i.e. weekly
walk test), the TEST LED is illuminated.
keys to select the TEST option and then press the
ZONE 1 01/02
ZONE 2 02/02
Document No. 996-148-000-5, Revision: 5
:more →:text
keys (Note: The ' : more' option is not shown
key.
key. The display then shows the Zone Location
key.
WITH SOUNDERS
←:back
:More Zones
NO SOUNDERS
←:back
:More Zones
and keys.
key.
Dimension Series
keys.
key. The
key and the display shows
User Manual