Panel Disablements; Zone Disablements; Point Disablements; Power Supply Fault Conditions - Honeywell MORLEY IAS DX Series User Manual

Dimension Series
4.3.2.4.1

Panel Disablements

DISABLE ALL SOUNDERS
•
In the example above, the display shows a description of the event, the event number and the total
number of events and the time at which the event (sounders disabled) was programmed (12:15).
•
Press the
scrolling will resume.
4.3.2.4.2

Zone Disablements

DISABLE FULL ZONE
•
In the example above, the display shows a description of the event, the event number and the total
number of events, the zone that is disabled and the time at which the event (zone disabled) was
progammed (03:36).
•
Press the
scrolling will resume.
4.3.2.4.3

Point disablements

Example :
•
In the example above, the display shows a description of the event, the event number and the total
number of events, the Zone number (Z01), the loop number to which this device is connected (L1),
the address of this device on the loop (A054), the type of device (MCP) and the time at which the
device was disabled (09:34)
•
The bottom line shows the Zone Location Text (20 character description) and the Point Location Text
(20 character description) for this device.
•
Press the
scrolling will resume.

4.4 Power Supply Fault Conditions

•
If the AC MAINS power source is interrupted or if the panel registers other fault conditions associated
with its power supply, the Supply Fault LED and Fault LED Indicators will be lit. Further details of the
fault can be viewed on the display.
•
The back light illumination of the alphanumeric display will be turned off.
•
If both the AC MAINS input and the Battery Standby Input fail then all LED and alphanumeric display
indicators will be off.
•
Possible fault conditions are:
User Manual
keys to scroll though the event list manually. If no key is pressed for 60 seconds, auto-
keys to scroll though the event list manually. If no key is pressed for 60 seconds, auto-
DISABLED 09/10 Z01 L1 A054 MCP 09:34
<Zone-Location-Text><Point-Location-Txt>
keys to scroll though the event list manually. If no key is pressed for 60 seconds, auto-
Document No.996-148-000-5, Revision: 5
01/03 12:15
02/03 Z01 03:36
MORLEY-IAS
Page 19