Level 2 Menu Functions; Table 5 - User Menu Options - Honeywell MORLEY IAS DX Series User Manual

Table of Contents

Advertisement

MORLEY-IAS

5.3 Level 2 Menu Functions

Press any number (0 – 9) key to display the Level 2 Menu Functions. These are normally inhibited
from use and the alphanumeric display will prompt for entry of the Level 2 pass-code as follows.
ACCESS TO MENUS RESTRICTED
Enter Level 2/3 passcode,
Enter the Level 2 pass-code, as described above, and the display will then show the Level 2 Menu
Functions.
Alternatively, if the key-switch option is fitted and programmed to enable Level 2 access, insert the key
and turn clockwise before selecting Level 2 Menu functions.
[U0]
Function
Commission
Test
Clock
Disable / Enable
View
The display will automatically revert to the Normal display after 60-seconds (programmable) if no
buttons are pressed. Press any number (0 – 9) key to return to the Level 2 menu display.
Access to Level 2 menu functions will automatically be cancelled after 5-minutes (programmable) if no
buttons are pressed. It will be necessary to re-enter the pass-code to re-enable the Level 2 menu
functions.
Press the 'X' key to manually return to the normal display and cancel Level 2 access.
Page 22
1:Commission
4:Disable/Enable
This option is not available to Level 2 users. It requires the entry of
the Level 3 password before the programming mode can be entered.
Allows the user to test parts of the system. The following tests can be
performed:
LED
To test the LED indicator lamps. This test will
automatically test all status indicators and each zone
indicator, in turn, and then terminate.
LCD
To test the alphanumeric display.
ZONES
To perform a 'Walk Test' on one or more zones. If the
test is performed 'With Sounders' all relay and sounder
outputs will be activated in continuous mode regardless
of pattern logic.
OUTPUTS
To test the relay and sounder outputs connected to the
system.
BUZZER
To test the internal buzzer.
To change the date and time in the panel.
To enable zones, inputs, outputs, delays and day mode operation.
To view devices, log, faults and other system status conditions.

Table 5 - User Menu Options

Document No. 996-148-000-5, Revision: 5
←:BackSp
2:Test
3:Clock
5:View Mode
Description
Dimension Series
User Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents