Installation; Selecting A Location; Applying Power To The Base; Desk Or Tabletop Installation - Uniden XC815 Owner's Manual

Cordless extend-a-phone
Table of Contents

Advertisement

Selecting a Location

Before choosing a location for your new phone,
read the "Installation Considerations" included in
the "Precautions and Important Safety
Instructions" brochure.

Applying Power to the Base

All the XC800 Series phones require the included
AC adapter and an AC outlet that is not controlled
by a wall switch. To relieve strain on the DC plug
when the phone is placed on a desk or table,
connect the adapter as shown below.
Wrap the power cord
around the convenient
notch on the bottom.
Important: Place the
power cord so that it
does not create a trip
hazard, or where it could become chafed and
create a fire or other electrical hazards.

Desk or Tabletop Installation

1. Place the base on a desk or tabletop.
2. Plug the AC
adapter cord into
the 9V DC input
jack on the base.
3. Place the AC adapter
cord around the
strain relief.
4. Plug one end of
the long
telephone cord
into the TEL LINE
jack on the base.
5. Plug the other end of
the cord into the wall
telephone jack.
6. Plug the AC adapter into a standard 120 VAC
wall outlet.
Note: Do not use an outlet controlled by a wall switch.
Use only the Uniden AC adapter supplied

Installation

with this phone.

Wall Installation

Standard Wall Plate Mounting
These phones are designed to be mounted on a
standard AT&T or GTE wall plate.
1. Plug the AC adapter into
the base.
2. Place the AC adapter cord
inside the molded channel.
3. Plug one end of the short
telephone cord into the
TEL LINE jack on the base.
4. Place the
telephone cord
inside the molded
channel on the
bottom of
the base.
Then plug the
other end of the
telephone cord
into the modular
jack on the wall.
5. Place the base on the posts of the wall plate
and push down until it's firmly seated.
6. Plug the AC adapter into a standard 120 VAC
wall outlet.
Note: Do not use an outlet controlled by a wall switch.
Direct Wall Mounting
If you do not have a standard wall plate, you can
mount your phone directly on a wall. Before
mounting your phone, consider the following:
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xc810Xc800 series

Table of Contents