Installing And Adjusting Your Phone; Desk/Tabletop Installation - Uniden XS9800 Owner's Manual

Color profile: Disabled
Composite Default screen
TIP
Before choosing a location
for your phone, read the
"Installation Considerations"
included in the "Precautions
and Important Safety
Instructions" brochure.
C:\Manuals 7\Exs9800\EXS9800.vp
Thu Oct 01 08:39:54 1998

Installing and Adjusting Your Phone

DESK/TABLETOP INSTALLATION

1) Plug the AC adapter cord into the 9 VDC input jack on the back of
the base.
2) Wrap the AC adapter cord around the strain relief notch.
Place the power cord so that it does not create a trip
hazard or where it could become chafed and create a fire
or electrical hazard.
3) Plug the AC adapter into a standard 120 VAC wall outlet.
Use only the Uniden AC adapter supplied with this phone
and DO NOT use an outlet controlled by a wall switch.
4) Charge the battery (refer to "Charging the Battery Pack," page 10).
5) Plug one end of the long telephone cord into the
the back of the base.
6) Plug the other end of the cord into your telephone jack on the wall.
jack on
TEL LINE
3