Watt-Controlled Programme (W) - CARDIOSTRONG EX70 Assembly And Operating Instructions Manual

3.5.5

Watt-Controlled Programme (W)

1. Select the watt controlled programme (W) and confirm the selection with the MODE button.
2. Set the watt value with the encoder and confirm with the MODE button.
NOTICE
L
The default value is 120 (Fig. 15).
3. Set the time with the encoder and confirm with the MODE button.
4. To start the programme, press the START/STOP button.
NOTICE
L
+ The resistance is automatically adjusted to the watt value.
+ The watt value can be adjusted during training with the encoder.
A signal sounds at the end of the programme.
5. To pause the programme, press the START/STOP button again.
6. To end the programme, press the RESET button.
The display changes to the main menu.
Figure 15
35