CARDIOSTRONG EX70 Assembly And Operating Instructions Manual page 23

Step 8: Assembly of the pedals
1. Mount the pedal (55) to
the pedals support arm
(58) with four bolts (86).
2. Repeat the step for the
other side.
Step 9: Assembly of the handlebar with the hand pulse sensors
1. Remove the pre-assembled four washers (66), four lock washers (65), two bolts (84) and two
bolts (85) from the main frame (1).
2. Guide the upper connection wire (60) through the handlebar (32).
3. Mount the handlebar (32) to the main frame (1) on the sides each with one washer (66), one lock
washer (65) and one bolt (84).
4. Mount the handlebar (32) to the main frame (1) on the front with two washers (66), two lock
washers (65) and two bolts (86).
23