Checking Smart Module Plan Overview - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Modify Basic Config will clear the configured micro-module view. Therefore, exercise
caution when deciding to perform the Modify Basic Config operation.
2.
3.
----End

5.5 Checking Smart Module Plan Overview

Context
The system type is FusionModule500.
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Check the device plan layout and device quantity inside the cabinet.
Step 3 Check smart module configuration information.
1.
2.
3.
4.
Figure 5-11 Checking smart module configuration information
----End
Issue 06 (2020-01-02)
Click Modify Basic Config, Modify Device, or Modify Aisle Parameter.
Modify the micro-module view based on the actual situation.
Choose Home > Plan Overview > Page Configuration.
Select 24 U cabinet or 42 U cabinet under Cabinet type.
Click OK.
Check the running information of ECC800, PDU, or UPS based on the requirements.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
119