Energetics ET 1070 Assembly Manual page 11

Step 2 Handlebar Assembling
1. Put two Ø17_Wave Washers (132), Lower Handle Bar (L) (4) and Lower Handle Bar (R) (5) in order
onto the shaft of Mast (10) and secure with two 5/16" × 15m/m_Hex Head Bolts (88) and two 5/16"
× 23 × 1.5T_Flat Washers (125) by using 12m/m_Wrench (136).
2. Connect Swing Arm (L) (15) with Lower Handle Bar (L) (4) and secure with three 5/16" ×
15m/m_Button Head Socket Bolts (94) by using Combination M5 Allen Wrench & Phillips Head Screw
Driver (135). Repeat the same procedure for the right side.
11