Mounting Bracket Installation - daviteq WS433-M12F-ATE User Manual

Sub-ghz wireless ambient temperature sensor

Table of Contents

Feature measuring ambient temperature:

Measure the ambient temperature, module type IP67

Measuring range -20 .. + 85 oC

Accuracy ±0.5oC

Resolution 0.125oC

6. Configuration

6.1 Reset Sensor Node

Step 1: Using Philips screw driver to unscrew M2 screw at the side of housing and carefully pull out the top

plastic housing in the vertical direction.

Step 2: Press the button until you see LED flashes 3 times to reset

6.2 Data rate configuration 625 kps

Take off the sensor cover like Step 1 and press the button until you see LED flashes 2 times for 625 kps option

6.3 Wireless sensor configuration with co-ordinator

You can configure the wireless sensor with the co-ordinator by following the steps in the link below:

http://www.daviteq.com/en/manuals/books/long-range-wireless-co-ordinator-ws433-cl/page/user-guide-

7. Installation

7.1 Mounting bracket installation

Locate the place where the wireless sensor is mounted, from that locate the position to mount the bracket;

Placing the wireless module on bracket and secure it by 02 x M2 screws (supplied in accessory bag)

Note: The bracket can be mounted on the wireless module in both direction, upward or downward

for-long-range-wireless-co-ordinator-ws433-cl

Table of Contents