Installation - daviteq WS433-TAG User Manual

Wireless active tag
Table of Contents

Advertisement

41D9999A
41D9999A
85

6. Installation

All the device such as WS433-TAG-01 and WS433-CL-07 should be fixed on trailers or tractors with screws;
ATTENTION:
DO NOT
install the Wireless sensor tag inside a completed metallic box or housing, because the RF signal can
not pass through the metallic material. The housing is made from Non-metallic materials like plastic, glass,
wood,... is acceptable.
NOTE:
The WS433-TAG and WS433-CL-07 sensors should be installed as close together as possible;
The maximum distance to connect is 3 meters (If installed outside this distance, WS433-TAG and WS433-CL-07
will lose connection).
Convert to
Float*
→ 27.2°C
*Because the sensor Type 01 specifies: both HEXA value of value
1 and value 2 are Float.
checksum

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ws433-clWs433-tag-01Ws433-cl-07

Table of Contents