daviteq WS433-M12F-ATE User Manual page 2

USER GUIDE FOR WIRELESS
AMBIENT TEMPERATURE SENSOR
WS433-M12F-ATE
WS433-M12F-ATE-MN-EN-01
This document is applied for the following products
SKU WS433-M12F-ATE
Item Code WS433-M12F
ATE-11
ATE-12-300
Notes * Must order for both wireless transmitter and sensor module
1. Functions Change Log
HW Ver. FW Ver.
2.5
2. Introduction
Wireless Ambient Temperature Sensor is a combination of wireless sensor transmitter WS433-M12F and ambient
temperature sensor ATE, it utilizes Digital temperature sensor delivers high accuracy measurement in range -35 to +
70oC. The wireless portion is Sub-GHz technology from Texas Instruments allows long range transmission at ultra-low
power consumption. It will connect 2-way wirelessly to the wireless co-ordinator WS433-CL to send data and receiving
the configuration. It can be configured the operation parameters like data sending interval, health check
cycle...remotely from Globiots platform or via ModbusRTU software (thru the WS433-CL). Its default data rate is 50
kbps, can be switched to 625 bps to increase the communication range. It can last up to 10 years with a single AA
battery. There are a lot of applications as environment monitoring for office, warehouse, data center, hospital,
agriculture...
HW Ver.
Wireless Sensor Transmitter 433Mhz, compatible with all DULP sensor
modules, AA 1.5VDC battery, IP67
Compact ambient Temperature Sensor DULP module, M12-male
connector
300mm Cable type ambient Temperature Sensor DULP module, M12-
male connector
Release Date
5.04 NOV-2019
2.5 FW Ver.
Functions Change
Change RF data rate by button
FEB-2020
5.04