Replace the Rechargeable Handset Battery Pack
1)
Remove the four screws
holding the battery
compartment with a
screwdriver and take off
the battery cover. Remove
the old battery pack from
the battery compartment.
2)
Line up the red and black
wires with the polarity label
in the battery compartment
the connector click into
place.
3)
slightly to make sure you
have a good connection.
)
Before placing the battery
check the rubber seal
located on the under side
of the cover: make sure
that the seal is in good
condition and that there
is no foreign matter under
the seal.
available through the Uniden
back cover page for contact
information.
UC539EH(DECT2085-4WX) OM_0227.in7 7
7
2/27/2008 4:48:02 PM