Installing The Handset Battery Pack; Charging The Battery Pack - Uniden EXV 98 Owner's Manual

HINT
Before using your phone,
fully charge the
rechargeable Nickel-
Cadmium battery pack.
We recommend that the
battery pack charges for
15-20 hours.
!
NOTE: In desk/tabletop
use, the battery charges
only in the vertical
position. When wall
mounted, hang the
handset on the cradle.
Use only the Uniden
battery (BT-098) supplied
with your phone.
HINT
When recharging the
battery pack, allow 15 to
20 hours without
interruption for the
handset to fully recharge.
6

INSTALLING THE HANDSET BATTERY PACK

1) Press in on the battery cover release
and slide the battery compartment
cover down.
2) Put in the rechargeable
Nickel-Cadmium battery pack. The
battery pack fits with the electrical
contacts touching. The label side on
the battery pack should be facing up.
3) Slide on the battery cover and snap
it into place.

CHARGING THE BATTERY PACK

Initial battery charging
Before using your phone for the first time, fully charge the
rechargeable Nickel-Cadmium battery pack. We recommend
that the battery pack charge for approximately 15-20 hours,
without interruption, before plugging the phone line into
your new phone.
1) Place the handset on the base.
2) Make sure the LED lights. If the LED doesn't light,
status
check to see that the AC adapter is plugged in and that the
handset makes good contact with the base charging contacts.
Continued