Set Up - Uniden UCIS 3000 Owner's Manual

Data Port
This is a connection which is in parallel with the telephone
line. It allows the connection of Device such as a modem,
caller ID or an answering machine. The data port is across
line .
SETTING UP YOUR UNIT
Factory Presets
The following table shows you the factory settings for your
unit:
Display
Language
LCD Contrast
Area Code
LDS Code
After the adapter is connected, the display will show as indi-
cated below for setting.
1. "SET LANGUAGE" appears on the
display. Press the REVIEW UP
button to select the language, E –
English, F – French, S – Spanish, and
then press the DIAL button to con-
firm the selection.
2. When "LCD CONTRAST" appears,
press REVIEW UP
the contrast darker, and then you
can press REVIEW DOWN
ton to set the contrast back to the preset.
3. Press "DIAL" button to confirm selection.
4. When "SET AREA CODE" ap-
pears, use REVIEW UP
ton and REVIEW DOWN
button to set your local area
code.
REVIEW UP
~9
REVIEW DOWN
When you are finished setting the local area code, press
Dial.
7
Setting
English
1
no setting
1
E
button to set
LCD CON TRAST
but-
but-
button -to change the digit from -, 0, 1, 2,
button - to move to the next digit.