Receiving Calls; Reviewing Calls - Uniden UCIS 3000 Owner's Manual

If You Are In A Area Where An FSK Signal Is
Not Available:
1. This unit will check your line for a stutter dial tone every
time you hang up or each time a call goes unanswered.
The MESSAGE indicator will flash when there is a mes-
sage waiting.
2. You may experience some delay in seeing the MESSAGE
indicator light up even though there are messages in your
mail box. This delay is due to regulatory matters and does
not indicate a problem with the unit.
This unit may not be activated or deactivated under certain
conditions. For example, when you retrieve your message from
an outside phone (not your own telephone number), the
MESSAGE indicator may not be canceled when you return
home. If you experience this situation, pick up the receiver
and hang up. The MESSAGE indicator will cancel.

Receiving Calls

1 When the telephone is not
in use and a new call is re-
ceived, the display will
show the NEW symbol, the
phone number, the caller's
name, and time and date of
the call for 20 seconds. The
RPT (Repeat) symbol will
appear if the call has come
in more than once.
2 After 20 seconds with no activity,
the display will default to the Stand-
By screen and remain on until an-
other call is received or a button is
pressed. This will show you the to-
tal number of calls stored and how many new calls that
have not been reviewed.

Reviewing Calls

1. When the NEW symbol is flashing on the Stand-By screen,
you have new incoming calls. Next to the NEW symbol is
the total number of new calls. Press the REVIEW UP
or REVIEW DOWN
stored calls.
2. The NEW symbol attached to each call will be removed
after you review the call.
15
REPEAT SYMBOL
NEW
SYMBOL
NEW SYMBOL
Total New Calls
button to review the incoming