Installing Your Phone; Set Up Base - Uniden DECT 2145 Series Owner's Manual

set up Base

attach the Base
For desktop Use
1. Turn the stand so the
word dESK is right-side
up (it will be on the left).
2. Insert the tabs into the
dESK notches at the top
of the base.
3. Slide the stand up until it
snaps into place.
For Wall Mount Use
1. Turn the stand so the word
WALL is right-side up (it
will be on the left).
2. Insert the tabs into the
WALL notches at the
bottom of the base.
3. Slide the stand down until
it snaps into place.
remove the stand
Pull the locking tabs up and back. Then, slide the stand straight off the
opposite direction you put it on.
Connect the Corded Handset
Use the coiled cord to
connect the corded handset
to the connector on the left
side of the base.

InstallIng your phone

DESK
DESK
WALL
DESK
WALL
WALL
5