Getting Started; Set Up The Base - Uniden D1688 User Manual

GETTING STARTED

Set Up the Base

Attach the Stand
For desktop use
DESK
DESK
WALL
1. Turn the stand so the word
is right-side up (it will be on the
left).
2. Insert the tabs into the
notches at the top of the base.
3. Slide the stand up until it snaps
into place.
Remove the stand
To remove the stand, pull the locking tabs up and back. Then, slide the
stand straight off the opposite direction you put it on.
Connect the Corded Handset
Use the coiled cord to connect the corded handset to the connector on the
left side of the base.
For wall mount use only
1. On the front of the base, slide the
handset clip out of its slot.
2. Rotate the clip 180 degrees.
3. Flip it from front to back and slide
it back into the slot.
WALL
DESk
DESk
For wall mount use
DESK
WALL
WALL
1. Turn the stand so the word
right-side up (it will be on the left).
2. Insert the tabs into the
notches at the bottom of the
base.
3. Slide the stand down until it snaps
into place.
DESK
is
WAll
WAll
English - 3