Duration Counter; Tone Button; Automatic Memory - Uniden UCIS 3000 Owner's Manual

B You can adjust the volume of the caller's voice by slid-
ing the VOLUME CONTROL on the right side of the
phone.
C After the conversation has finished, press the
SPEAKERPHONE button to hang up.
2. To Make A Call
A Press and release the SPEAKERPHONE button.
B When you hear a dial tone, dial the number or press
the auto memory button just as you would on any other
push-button telephone. The number appears on the
display window.
C When your party answers, adjust the sound level of
his or her voice by sliding the VOLUME CONTROL
located on the right side of the phone.
D After the conversation has finished, press
SPEAKERPHONE to hang up.
If you wish to switch from speakerphone to hand-
set, simply lift the handset.
If you wish to switch from handset to speakerphone,
press and release Speakerphone and then hang
up the handset.

Duration Counter

A built-in counter will start counting form your reference 6
seconds after you lift the handset or 6 seconds after you dial
a telephone number.

Tone Button

If the PULSE/TONE switch is set to the PULSE position, and
you want to make a tone dialing call after pulse dialing, press
the TONE button once, then dial the number. The number
dialed out will be changed to tone dialing automatically with-
out setting the PULSE/TONE switch to TONE position.

Automatic Memory

This telephone can store up to 20 telephone numbers (10
auto memory buttons and 10 keypad memory locations). Each
of the memory number locations can store up to a maximum
of 16 digits. Numbers can be stored in either pulse or tone
mode.
10