To Store A Phone Number In Memory; To Dial A Phone Number In Memory; Volume Button; Redial Button - Uniden UCIS 3000 Owner's Manual

To Store A Phone Number In Memory:

1. Press the STORE button, "MEMORY STORING" appears
on the display window.
2. Dial the number you want to store in memory.
3. Press STORE again.
4. Press the desire memory location.
• To store in an auto memory button (located on right-
hand side of base) – Press 1,2,3 or 10).
• To store in a keypad memory location – Press one of
the keypad buttons
5. Use pull out memory index to write in name and loca-
tion where it is stored.

To Dial A Phone Number In Memory:

1. Lift the handset and wait for a dial tone.
2. Press any memory location.
• To dial an auto memory button (located on right-hand
side of base) – Press the desired auto memory button
(1,2,3.... or 10).
• To dial a keypad memory location – press the
MEMORY button first, and then the desired keypad
button (1,2,3.... or 0).
3. The number will be displayed and dialed automatically.

Volume Button

A built-in amplifier feature allows you to increase the listen-
ing volume in the receiver of the handset when speaking with
your party. When needed, press the VOLUME button.
The volume will go back to normal after you hang up the
handset.

Redial Button

1. If the number you dialed is busy, or you want to call the
last number dialed again, press and release the hook
switch for a new dial tone.
2. Press REDIAL. The number will appear on the display
window.
3. The last number called will automatically be redialed.
11
(1,2,3.or 0).