Deleting Calls; Callback - Uniden UCIS 3000 Owner's Manual

3. If the NEW symbol is still flashing when the display goes
back to the Stand-By screen, there are new calls that you
have not yet reviewed.
4. The reviewed number can be stored into any of the auto
memory buttons or keypad memory locations by press-
ing the STORE button first, then one of the memory but-
tons.
5. When you have reached the end
of the call records, the display will
indicate "-END OF LIST-", confirm-
ing there are no more calls stored.
If the telephone number received is more than
10 digits, the unit will only store the first 10 dig-
its into memory.

Deleting Calls

1. To delete an individual call: When
reviewing calls, you can delete an
individual call by pressing the DE-
LETE button once. The display will
be erased line by line and the rest
of the records will be renumbered.
2. To delete all calls: When review-
ing calls, you can delete all calls by
pressing and holding DELETE for
more than 3 seconds. Then "DE-
LETE ALL?" will appear. Press DE-
LETE to confirm you really want to erase all records.
"-NO CALLS-" appears on the display to show there are
no calls stored in memory.

Callback

When reviewing received calls, there are two ways to dial the
telephone numbers shown on the display by pressing DIAL.
1 With the handset in its cradle (on-hook), press DIAL.
"PICKUP PHONE" will appear in the LCD display to ask
you to pick up the handset. The number will be dialed
after you pick up the handset.
2 If you pick up the handset, review the calls, and press
DIAL, the displayed number will be dialed immediately.
The HANDSET symbol will light up in the upper
left hand corner of the LCD display when the
handset is picked up.
611-555-1234
16