General Product Care - Uniden UCIS 3000 Owner's Manual

Maintenance
Resetting Your Telephone's Programming
Resetting your telephone's programming will clear
the area code and all of the calls from call memory
but your preprogrammed Memory Buttons will not
be deleted. You may wish to write any important
numbers down before performing a reset.
If you wish to clear and/or reset all of your telephone's pro-
gramming for any reason:
1. Disconnect from phone line by removing phone cable
from "TO TEL. LINE" jack at the bottom of this phone;
2. Remove one or more batteries;
3. Press one or the review buttons a few times, wait for 10
seconds.
Please follow the "First Time Installation" proce-
dures above to properly reconnect and reprogram
the unit.
Maintenance Information
Although your unit is designed to be maintenance free, it con-
tains sensitive electronic parts. Treat it with care to assure
best performance.
Avoid Rough Treatment: Avoid dropping the unit. The origi-
nal packaging should be used for protection if you must ship
the unit. Dropping or damaging the unit will void the war-
ranty.
Cleaning: The hard plastic casing on your unit has a durable
finish that should retain its original luster for many years. Clean
exposed parts with a soft, slightly damp cloth. To remove
stains, use a mild soap. Never use detergents, excess water,
treated cloths, harsh cleaning agents, or sprays.
19